US Grading Scale Explained: Why There’s No E (and What Each Letter Really Means)
Short answer: the US grading scale runs A, B, C, D, then F — and the missing E is not a typo. It is a piece of history. The letter scale began in 1897 with an E in it, and schools spent the next forty years dropping it, because students kept reading E as “Excellent” when it meant failure. Everything else about the scale — where A starts, what a plus or minus does to your GPA, why the same 90% is an A at one school and an A− at another — follows from choices schools made one by one, and no two schools made exactly the same ones. This guide explains the US grading scale the way it actually works: the letters, the percentages behind them, the history, and the differences that catch students out.
If you only need the conversion, our Letter Grade Calculator turns any percentage into a letter grade in seconds. But the conversion is the easy part. The part that causes real confusion is everything around it: why the scale skips a letter, why your friend’s 89% is a B+ and yours is an A−, and why a D can count as a pass and still wreck your plans. Those are the questions this post answers.
The US Grading Scale at a Glance
There is no single official US grading scale. What exists is a widely used standard that most high schools and colleges follow, with their own variations on top of it. The table below shows the standard version — the same scale this site’s calculators use — with the percentage range, the letter, and the grade points each letter is worth on the 4.0 GPA scale.
| Letter grade | Percentage | Grade points | What it means |
|---|---|---|---|
| A+ | 97–100% | 4.0 | Exceptional |
| A | 93–97% | 4.0 | Excellent |
| A− | 90–93% | 3.7 | Excellent, with a small deduction |
| B+ | 87–90% | 3.3 | Very good |
| B | 83–87% | 3.0 | Good |
| B− | 80–83% | 2.7 | Good, with a weak spot |
| C+ | 77–80% | 2.3 | Above average |
| C | 73–77% | 2.0 | Average |
| C− | 70–73% | 1.7 | Below average, but passing |
| D+ | 67–70% | 1.3 | Poor, but passing |
| D | 63–67% | 1.0 | Poor, barely passing |
| D− | 60–63% | 0.7 | Minimum pass |
| F | Below 60% | 0.0 | Failing |
Two things in that table surprise most students. First, A+ and A are both worth 4.0 grade points, so the difference between them is cosmetic on a standard GPA — a 98% and a 94% count the same toward your average. Second, the gap between an A− (3.7) and a B+ (3.3) is 0.4 grade points, which is the single biggest step on the whole scale. A student who scores 89% instead of 90% loses more GPA than a student who scores 79% instead of 80%. That 90% boundary is where the scale bites hardest, and it is why so many students search for exactly that score — our posts on what grade 18/20 is and what grade 9/10 is both come down to the same question: is 90% an A or an A−?
The honest note that belongs on every page like this one: the letter grade depends on your school’s own scale. The table above is the standard version, but your school’s version is the one that counts for you, and it may differ. The rest of this guide explains how, and why.
Why Is There No E in the Grading Scale?
The US grading scale explained properly has to start here, because it is the question almost everyone asks first — and the answer is genuinely historical, not logical. There was an E. The first recognisable letter grading scale in America was published by Mount Holyoke College in Massachusetts in 1897, and it ran A to E: A meant 95–100% (Excellent), B meant 85–94% (Good), C meant 76–84% (Fair), D meant 75% (Passed), and E meant anything below 75% — failure. The letters were not a timeless system handed down from somewhere. They were one college’s experiment, and the experiment changed.
The following year, Mount Holyoke added an F to its scale — and briefly kept the E as well, making a six-letter scale. Other schools did not copy that. Over the next few decades, universities began dropping the E and keeping the F instead, and by the 1930s the A–F version without E was becoming the norm in higher education. Public schools followed more slowly, adopting it through the 1950s, and by the 1960s the A, B, C, D, F scale was near-universal across the United States.
Why did E lose? Education researcher Thomas R. Guskey, professor emeritus at the University of Kentucky, is the person most often asked this question, and his answer is refreshingly honest: there is no definitive documentation that says exactly why. But the leading explanation, and the one Guskey himself gives, is a misunderstanding. Students saw an E and read it as “Excellent” — or “Exemplary” — the opposite of what it meant. None of the other letters stood for a word, which made the confusion stranger, but it was real enough that universities decided a failing grade needed a letter nobody could mistake. F unambiguously means failure. E did not.
There was also a tidiness argument. Influential grading researchers of the early 1900s, including Isidor Edward Finkelstein, argued that five divisions was the right number for a marking scale — enough to separate students, few enough to use consistently. Dropping E left exactly five letters: four passing grades and one failing grade, with a clean gap between them. An E sitting between D and F would have blurred the line between passing and failing, and might have looked like a near-pass rather than a fail. The scale we have now is the result: A to D pass, F fails, and nothing in between.
One footnote worth knowing: E never fully died. A few districts kept it, and in the UK an E is still a real grade — a minimal pass at A-level, not a fail at all. So if you ever see an E on a transcript from another country, do not assume it means what it would have meant in 1897 America. The letter is the same; the meaning is not.
What Each Letter Grade Really Means
Percentages and grade points tell you what a letter is worth. They do not tell you what it means — and the meaning is what students, parents, colleges and employers actually react to. Here is the scale letter by letter, in the terms people use it.
A — Excellent (90–100%)
An A means you have mastered the material, not just passed it. On the standard scale it starts at 90%, and the plus and minus split the top band into A+ (97–100%), A (93–97%) and A− (90–93%). All three are worth 4.0 except the A−, which is worth 3.7 — a quirk that means a 92% average can sit below a 4.0 GPA even when every grade is an A of some kind. An A in a regular class is strong; an A in an honours or AP class is stronger still, because many schools add weight to it. Our guide to what a good GPA is explains what an A average means at each level of school, and why the same GPA impresses different people in different contexts.
B — Good (80–90%)
A B is a good grade, full stop — and it is worth saying that plainly, because students who get their first B often treat it as a disaster. It is not. A B means solid understanding with a gap somewhere: a missed concept, a weak exam, a paper that was good but not excellent. On the GPA scale a straight B is worth 3.0, which is the average most scholarships and many employers use as their first cut-off. The B band is also where the plus/minus system matters most in everyday life: an 89% is a B+ (3.3) and an 87% is the same letter with the same points as an 83% (3.0), so two students with the same letter can be several percentage points apart. If you want the full judgement on this letter, our post on whether 85% is a good grade works through exactly that question — 85% is a B on this scale, and the answer is more interesting than a yes or no.
C — Average (70–80%)
A C is the middle of the scale, and the most misunderstood letter on it. Officially it means average: you understood the material well enough to move on, but not well enough to be comfortable. In practice, a C is where the scale starts to have consequences. Many courses require a C or better to count as a prerequisite for the next course, so a C− in a subject you need to continue in can be a real problem even though it is technically a pass. A single C will not ruin a GPA — one C in a 3-credit course costs a 4.0 student about 0.15 GPA points over a full year — but a pattern of C’s will. We wrote a whole post on whether a C is a bad grade, because the honest answer is “it depends on what the C is for”, and that is not something a table can tell you.
D — Barely Passing (60–70%)
A D is the strangest letter on the scale: it passes and it fails at the same time. It is worth 1.0 grade point, and it means you did the minimum to get credit for the course — but only in the narrowest sense. Many schools will not accept a D as a prerequisite, will not count it toward a major, and will not let it transfer to another college. Financial aid can be affected too, since aid usually requires satisfactory academic progress, and a term full of D’s rarely qualifies. Our guide to what a passing grade is explains the difference between a technical pass and a useful pass, and the D is where that difference lives. If you are sitting on a D, the useful question is not “did I pass?” but “what does this D block me from doing next?” — and our post on how much one bad test lowers your grade shows the maths for climbing back out of it.
F — Failing (Below 60%)
An F means you did not meet the minimum standard for the course, and you get no credit for it. It is worth 0.0 grade points, so it drags a GPA down hard: one F in a 3-credit course costs a student with a 3.5 average roughly 0.25 GPA points over a full year, and it stays in the average even if you retake the course, at many schools. The F is also the only letter that has never had a plus or minus attached to it — there is no F+ or F−, because there is no meaningful difference between degrees of failing a course. The one mercy is that an F is usually fixable: most schools let you retake a failed course, and many will replace the grade, or at least let the new grade sit alongside the old one instead of under it.
Plus/Minus vs Straight Letters: The Same Score, Two Different Grades
The biggest source of confusion in the US grading scale is not the letters — it is the two different systems schools use to assign them. About half of American schools use a plus/minus scale, the one in the table above, where each letter is split into three bands (B+, B, B−). The other half use a straight scale, where each letter is one wide band: A is 90–100%, B is 80–90%, C is 70–80%, D is 60–70%, and F is below 60%.
The difference is not cosmetic. On a straight scale, 90% is a plain A worth 4.0 grade points. On a plus/minus scale, the same 90% is an A− worth 3.7. An 89% is a B+ (3.3) on a plus/minus scale and a plain B (3.0) on a straight scale — the plus/minus student actually does better on that score, because the plus lifts them above the flat B. And an 87% is a B+ (3.3) on one scale and a B (3.0) on the other, even though the work was identical. Two students can hand in the same paper, score the same percentage, and walk away with different GPAs — not because one did better work, but because their schools slice the scale differently.
Neither system is right or wrong, and neither is going away. The plus/minus scale is more precise: it rewards the student who scores 89% over the one who scores 81%, instead of giving them the same letter. The straight scale is simpler and more forgiving at the top of each band: every score from 90% to 100% is an A, and nobody loses grade points for landing on 91% instead of 94%. Colleges know both systems exist, which is why admissions offices usually look at your GPA alongside your school’s grading policy, not instead of it. The practical lesson for students is simple: find out which system your school uses before you start calculating what you need on the final. A student on a straight scale who needs a 90% to keep an A has a different target from a student on a plus/minus scale who needs a 93% to keep a flat A — and mixing the two up is the most common grade-maths mistake there is. If you want to see the conversion for your own school’s scale, the Letter Grade Calculator uses the plus/minus version shown above, and the GPA Calculator shows how each version feeds into your average.
Why the Same Percentage Is a Different Letter at Different Schools
Even among schools that use the plus/minus system, the cut-offs move. The standard version in this guide starts A at 90%, B at 80%, C at 70% and D at 60% — the familiar 90/80/70/60 ladder. But that ladder is a convention, not a law, and schools shift it in both directions.
Some schools use a strict scale, where A starts at 93% or even 94%, B starts at 85%, and C starts at 77%. On a strict scale, an 89% is a B+, and a 91% is an A− — the same scores that would be an A− and an A on the standard scale. Other schools use a lenient scale, where A starts at 89% or 90% but the bands are wider, or where a 59% still scrapes a D−. And some schools do not use percentages at all for the cut-offs: they set the boundaries by class performance, or by department, so the same 85% can be a B in one teacher’s class and a B+ in another’s down the hall.
Then there is weighting. Many high schools add extra grade points for honours, AP and IB courses — typically +0.5 for honours and +1.0 for AP or IB — so an A in an AP class can be worth 5.0 instead of 4.0 on a weighted GPA, while the letter on the report card stays an A. That is why two students can both have a 4.0 GPA and have taken very different courses, and why colleges ask for weighted and unweighted GPAs separately. Our guide to calculating your GPA walks through weighted and unweighted averages step by step.
The rule that saves students from all of this is boring and essential: read your syllabus. Every teacher’s syllabus states the grading scale for that class, and that scale overrides every table on the internet, including this one. If your syllabus says A starts at 92%, then 91% is an A− in that class, whatever the standard scale says. Check it in the first week of term, not the week of the final.
Grade Inflation: When A Became the Average
There is one more story the scale tells, and it is the one that has changed most in living memory. The average college GPA in the United States rose from 2.81 in 1990 to 3.15 in 2020, according to the National Center for Education Statistics — and the average high-school GPA rose from 2.68 to 3.11 over a similar period. At the same time, the A became the most commonly awarded grade in American colleges, a position it has held since at least 2009. At Harvard, about 60% of undergraduate grades handed out in 2024–25 were flat A’s; at Yale, about 80% of grades in 2022–23 were an A or an A−.
That is grade inflation, and it changes what the letters mean even when the scale itself stays the same. When a C meant average in 1970, it described the middle of the class. When the average grade is now a B+ or an A−, a C describes a student well below the middle — which is why a C feels worse today than the word “average” suggests. It also means a GPA on its own tells colleges and employers less than it used to: a 3.8 from one school and a 3.8 from another can describe very different students, because the two schools grade differently. That is why class rank, course difficulty, and standardised test scores still matter alongside the GPA, and why some universities have started capping the share of A’s a course can award — Harvard’s faculty voted in 2026 to limit flat A’s to 20% of students per course from 2027.
For students, the practical point is not to panic about inflation and not to celebrate it either. A high GPA still opens doors; it just opens them alongside everything else on the transcript. The grade that matters most is still the one in the hardest course you took, not the highest letter on the page.
The US Scale vs the Rest of the World
The last thing that trips students up is assuming the US scale is the world’s scale. It is not — and the differences are large enough to cause real misunderstandings for international students in both directions.
In the United Kingdom, a university mark of 70% is not a C. It is a First — the highest degree classification there is — because British marking treats 70% as exceptional work, not as a near-miss. A 60% is a 2:1, a good degree. An American student who sees a 65% on a UK transcript and reads it as a D is misreading it by three whole grades. Our Degree Classification Calculator works out the UK system properly, and a full explainer of what each UK class means is coming in this blog series.
In Australia, the top band is HD — High Distinction — for 85% and above, followed by Distinction (75–84%), Credit (65–74%) and Pass (50–64%). There is no A at all, and the pass mark is 50%, not 60%. Our WAM Calculator works in the Australian system, and again, the explainer post for it is on its way.
In Canada, there is no single national scale: Ontario universities use different scales from British Columbia ones, and the same percentage can be an A at one university and a B+ at another. Our Canada GPA Calculator carries the main Canadian scales side by side for exactly that reason.
The lesson is the same one this whole post keeps coming back to: a letter grade only means something inside the system that awarded it. Outside that system, you need the conversion — and the context.
How to Read Your Own School’s Scale in Three Steps
Step 1: Find the scale in writing. It is in your course syllabus, your student handbook, or your school’s website — usually under “grading policy”. If it is not written down anywhere, ask the teacher. Do not guess from what your friends’ schools do.
Step 2: Check whether it is plus/minus or straight. This one detail changes every boundary on the scale. If your school uses plus and minus, your targets are the narrow bands in the table above. If it uses straight letters, your targets are the wide 10-point bands, and a 90% is a full A.
Step 3: Check the weighting. If your school weights honours and AP courses, a letter grade in those courses is worth more grade points than the same letter in a regular course — and your weighted GPA will be higher than your unweighted one. Colleges look at both, so know both numbers, not just the bigger one.
Once you know those three things, the scale stops being a mystery and becomes a tool. You can work out exactly what you need on the next test to hold a grade, which is the calculation our Test Grade Calculator and GPA Calculator exist to do — and you can stop worrying about the letters that do not apply to you. Including E, which has not applied to anyone in America for about ninety years.
Frequently Asked Questions
Why is there no E in the grading scale?
There used to be one. Mount Holyoke College’s original letter scale in 1897 ran A to E, with E meaning failure. In the 1930s, universities began replacing E with F, most likely because students read E as “Excellent” — the opposite of what it meant — while F unambiguously means failure. By the 1960s the A, B, C, D, F scale was near-universal in the US, and E had disappeared from American report cards.
Is 90% an A or an A−?
It depends on your school’s scale. On the standard plus/minus scale, 90% is an A− (worth 3.7 grade points), because a flat A starts at 93%. On a straight-letter scale, 90% is a plain A (worth 4.0). Check your syllabus — this is the single most common grading question students ask, and the answer is always in the syllabus.
What is the difference between a plus/minus scale and a straight scale?
A plus/minus scale splits each letter into three bands (B+, B, B−) with different grade points for each, so it rewards small differences in percentage. A straight scale gives each letter one wide 10-point band (A is 90–100%, B is 80–90%), so every score in the band earns the same grade points. The same percentage can be a different letter — and a different GPA — under the two systems.
Is a D a passing grade?
Technically, yes: a D earns course credit and is worth 1.0 grade point. Practically, often not: many courses require a C or better as a prerequisite, many majors will not count a D toward the degree, and many colleges will not accept a D for transfer credit. A D passes the course but can still block what comes next.
What percentage is an A in the US?
On the standard scale, an A starts at 90% — but a flat A, as opposed to an A−, starts at 93%. Some schools use a stricter scale where A starts at 93% or 94%, and some use a more lenient one. There is no single national cut-off, so the percentage that earns an A is whatever your school’s grading policy says it is.
How is the US grading scale different from the UK grading scale?
The biggest difference is where the top sits. In the US, 90% is an A. In the UK, 70% is a First — the highest degree classification — because British marking treats 70% as exceptional work. A 60% in the UK is a 2:1, a good degree, while a 60% in the US is a D−, the lowest pass. The numbers look the same; the meaning is almost reversed.
The US grading scale explained in one sentence is this: five letters, four of them passing, one of them failing, and a hundred years of history deciding where each one starts. Know your own school’s version of it, and the letters stop being a mystery — they become something you can plan around.
